PE sheet is a high degree of crystallinity, non-polar thermoplastic resin. Original appearance of HDPE is milky white, low cut leaving a certain degree of translucency.
PE plate with excellent resistance to most of the characteristics of living and industrial chemicals. Certain types of chemicals, chemical corrosion, such as corrosive oxidant (nitric acid), aromatics (p-xylene) and halogenated hydrocarbon (carbon tetrachloride). The polymer is not hygroscopic and has good steam-proof, and can be used for packaging purposes. HDPE has good electrical properties, particularly high insulation dielectric strength, making it very suitable for wire and cable. Moderate to high molecular weight grade with excellent impact resistance at room temperature even under the low temperature -40F. Unique feature of all grades of HDPE is the appropriate combinations of four basic variables: density, molecular weight, molecular weight distribution, and additives. Different catalysts are used in the production of customized special polymers. These variables combine to produce HDPE grades for different purposes; the performance to achieve the best balance. Has good chemical stability, resistant to most acids, alkalis, organic solvents and water erosion. Good electrical insulation.
It has high toughness, tensile, corrosion resistance, low temperature resistance, good resistance to abrasion and so on. In the chemical industry, clothing, packaging, food and other fields has wide application. Can be filled, flame retardant, modified, the surface can be embossed, matte. LDPE (high pressure LDPE) nature than soft, low mechanical strength, lower melting point, suitable for making films and cable insulation. HDPE (low density polyethylene), rigidity, mechanical strength, high melting point. For hollow articles, injection molding products, widely used in the manufacture of hockey arena walls. Thickness: 1-350mm colors: natural, white, blue, yellow, gray, black, green, and so on.