Crane outrigger pads Advantage :
--Non-stick surface, easy to clean.
--Corrosion and chemical resistant.
--Noise- absorption, Vibration-absorption
--Super compression strength
--15 Percent the weight of steel pads and easier to handle
--Compressive loads up to one million pounds
--Up to 15,000 pounds per square foot
--Non-Toxic and smell
-- Are flexible, so they will bend but not break under extreme loads
Crane outrigger pads Benefits:
--Work in sub zero temperatures
--Easy to mount, replace
--Lower maintenance costs.
--Durable & Long Lasting
--Cost Efficient compared to Steel or Aluminum
--Safer to use in the field compared to other wood based pads.
Crane outrigger pads Application:
Our Outrigger Pads put under the support-leg of Truck Crane,
Rough Crane, Boom Pump,
Concrete Pump and so on.
Also we can provide the ground protection mat as following
HDPE ground protection road mat Advantages:
2,Easy installation on uneven ground.
3.Heavy duty road mat providing temporary road ways and tough durable working areas.
4.Less costs than aluminium and wooden mats.
5.Made of long-lasting HDPE that can flex without breaking-superior to pluwood.
6.Suitable for extreme weather conditions and most ground conditions.
8.Extremely durable,Weather-proof and UV resistant.
HDPE ground protection road mat Application:
Work and staging areas
-Apply the Right material for your application
-15 Percent the weight of steel pads
-Chemically inert, serviceable from 180° F to - 250° F
-Corrosion, chemical, wear and moisture resistant.
-Non-stick surface, easy to clean.
-Compressive loads up to one million pounds
-Up to 15,000 pounds per square foot
-Work in sub zero temperatures
-Easy to mount, replace
-Lower maintenance costs
-Cost Efficient compared to steel or Aluminum
-Available in Any Thickness and size required
-Special blends available-show us your problem application
-Colors available . Black and white are standard
Plastic outrigger pad are made from ultra high molecular weight polyethylene(UHMWPE). The material is distinguished for its outstanding sliding properties, extreme wear resistance, high impact strength and very high resistance to chemicals and has established itself in technical applications.
Plastic outrigger pad enhance in an important degree to the safety at all lifting and elevating jobs. Only if the capacitance of the ground is large enough to support the load, which is carried out by means of the outriggers on the floor, the machine can maintain its stable work position.
They are used on:
Truck mounted cranes
Aerial work platforms
Advantages of Plastic outrigger pad in polyethylene:
- No puzzling with wooden logs, deposit plate and ready!
- Lighter than water, easyer to handle, less back lesions.
- Less chance for injuries, does not splinter.
- Does not absorb water, does not dry out, no corrosion
- A constant quality under all circumstances.
- No extra treatment needed to limit the capacitance against ageing.
- Each plate is a finished product.
- No usure , long use duration.
- Easily to clean without mechanical resources.
- Practically unbreakable and thus extremely reliable on each floor profile.
- High pressure resistance, less distortion even give more stability up to +100 tons.
- Ecological product, available in all dimensions.
- Insensitively for aggressive or chemical substances, for example oil and salt.
- Economic, favourable, certainly on long duration.
- Aesthetically appearance.
- Makes a looked after impression and shows sense for effective work.
Parameter table of Plastic outrigger pad:
1.High bearing capacity, the bearing pressure up to 15-18 tons /cm2 if you put 60mm big outrigger pad sale under the four angle.
2.High security. The big outrigger pad sale body adopts UHMW-PE composite material, no fault under high pressure.
3.Environmental adaptability. It can be used in a variety of weather conditions, such as high temperature, extremely cold, etc..
4.Long service life. It is wear resistance, anti aging, and can be used repeatedly for more than 20 years.
5.Convenient. Light weight and convenient pavement.
The mobile crane outrigger pads is mainly used as the backing plate under the outrigger of engineering machinery, plays a supporting role. The mobile crane outrigger pads possesses high strength and stiffness, and then it can reduce deformation quantity of the body under the stress. It can provide more stable support force for cranes, concrete pump truck and other heavy engineering machinery vehicle .
The mobile crane outrigger pads is composed of two parts, including plate body and a portable rope. The plate body is made of UHMW-PE composite material at high temperature and high pressure special process. The portable rope is made of nylon material. The end of portable rope plate embedded in the plate body in order to facilitate the carrying and arrangement
Advantages in severe environment or conditions
simple to install and requires virtually no maintenance;
unlimited lifetime warranty;
ergonomic & envrionmentally friendly;
easy to clean;
hand cut-outs for field handling;
custom sizes available;
Logo imprint available;
no cold imbrittlement, works from -80oC to 100oC;
non-conductive, non-magnetic, and non-fibrous;
absorbs no water