Home > News > Content

LDPE LDPE Granules Low Density Polyethylene

Jul 15, 2019
Basic Info
  • Usage: General Plastics, Engineering Plastics, Specialty Plastics

  • Plastic Forming Method: Film Pressure

  • Density: 0.920-0.922g/cm3

  • Turbidity: 10.0%

  • Tensile Strength (Horizontal): 20n/Mm

  • Breaking Strength: 9.0mpa

  • Colour: White

  • Trademark: Low Density Polyethylene(LDPE)

  • Specification: SGS

  • Material: Low Density Polyethylene/LDPE

  • Plastic Properties After Heated: Thermoplastic Plastics

  • Color: White

  • Mfr(Melt Flow Rate): 2.1-2.9g/10min

  • Elongation at Break: 500

  • Tensile Strength (Vertical): 50n/Mm

  • Cleanness: 7/Kg

  • Grade: Injection ,Film Grade

  • Transport Package: 25kg/Bag, 20mt/20′fcl

  • Origin: Heibei, China

Product Description


Direct Manufacturer, Free Sample, Competitive Price and Good quality LDPE for sale

Usage: General Plastics
Material: Low Density Polyethylene/LDPE
Color: White

Product Description
Low Density Polyethylene
Product name: Low Density Polyethylene
Other name: LDPE
CAS No.: 9002-88-4

Character: High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.915 ~ 0.940. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good

1. Fiber (Carpet, Textiles, Upholstery, etc. )
2. Film (Shopping bags, casting film, multilayer film, etc. )
3. Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. Extrusion Molding (Sheet, Pipe, Wire & Cable, etc. )
5. Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc. )

Quality index: Different grade
Item: Standard
Density: (g/cm3)0.922
Tension strength/Mpa: 130
Elongation/%: 1000
Embitterment temperature ° C: -35
Melting Point/° C: 110
Elongation%: ≥ 600
Tensile strength: ≥ 130
The melt flow index: 0.3
FTU%: ≤ 13%
Melt Flow Rate   (MFR)15g/10min
Tensile Yield   Strength7Mpa
Elongation at Break75%
Wien Softening   Point85°C
PackingIn 25 kg PP woven bags,20MT/20'FCL

LDPE film grade
Melt Flow Rate   (MFR)2g/10min
Tensile Strength9Mpa
Elongation at Break500%
Fish eye   max(0.3-2mm)30n/1200cm2
PackingIn 25 kg PP woven bags,20MT/20'FCL