Home > News > Content

Recycled HDPE Granules, High Density Polyethylene

Jul 15, 2019
Basic Info
  • Usage: General Plastics, Engineering Plastics, Specialty Plastics

  • CAS No: 9002-88-4

  • Specification: AAA

  • HS Code: 39012000

  • Material: High Density Polyethylene/HDPE

  • Color: Transparent White

  • Origin: China

Product Description

Virgin and recycled HDPE&LDPE&LLDPE for different grade

1. Virgin & Recycled
2. Type: Film grade, Injection molding grade, Blowing molding grade, extrusion grade,
3. Pack: 25kg/bag
Virgin & Recycled HDPE / LDPE / LLDPE granules

We are direct factory of HDPE, LDPE, LLDPE, PP granule, different MFR or MFI are available for your different usage.

1, Film Grade HDPE,
Stretch film tape, blown film, carrier bags, film extrusion, blending partner,
Bags and density modifies, products for use in property modification

2, Fiber or Monofilament HDPE,
Monofilament, ropes, yarns

3, Injection Moulding Grade HDPE,
House wares, caps, thin walled, Transport and stacking crates, Bottle crates, Lightweight household,
Disposable articles large, Molding and complicated parts, closures/seals, packaging, Engineering parts,
Transport containers, PET bottle base cap, Injection moulding grade specially for cap

4, Below Moulding Grade HDPE,
Petro cans, containers, disinfectant bottles, sheet for thermoforming, drums, heating oil strorage tanks,
Fabric softeners, Extrusion large blow moldings, bottle extrusion

5, Pipe Extrusion Grade HDPE,
PE80, PE100, gas/water pipe, UV Stabilization and pigments during processing.

6, Extrusion Grade HDPE,
HDPE cable material
Typical Value
Mass densityg/cm 30.941-0.959
Melt flow Rate(190 centidegree /2.16kg)g/10min≤1.0
Tensile yield strengthMPa≥19.0
Flexural modulusMpa≥965
Elongation@ break%≥400
Impact Embrittlement temperaturecentidegreeMAX -118
Dielectric Constant100KHZ2.32
Loss Tangent100KHZMAX 0.0001
1MHZMAX 0.0001
Volume resistivityOHM-CMMIN 1x10 15
Mainly used for the production of high toughness of the telephone,cable insulation material


Physical PropertiesTest MethodNominal ValueUnit
DensityISO 11830.921g/cm 3
Melt Mass-Flow Rate (MFR)ISO 11331.9g/10min


Shore Hardness (shore D)ISO 86845
Mechanical Properties


Tensile ModulusISO 527-2175MPa
Tensile StrengthYield,ISO 527-29.0MPa
Tensile Strain(Break)ISO 527-2850%
Modulus of ElasticityInternal Method250MPa


Vicat Softening TemperatureISO 306/A5089.0°C
Melting Temperature (DSC)DIN 53765108°C
Peak Crystallization Temperature (DSC)DIN 5376597.0°C
Heat of FusionDIN 53765110J/g


Volume ResistivityASTM D2578.5E+15ohm ?cm
Dielectric StrengthASTM D14930.0kV/mm
Dielectric Constant (60Hz)ASTM D1502.20%
Dissipation Factor (60 Hz)ASTM D1500.00050


PropertiesTest conditonTest methodTest dataUnit


Drop impact strength
ASTM D-170990g
Elongation ,vertical/horizontal
ASTM D-882600/800%
tensilestrength,thermal resistance       
ASTM D-1004105/95Kg/cm
ASTM D-638930%
tensile strength
ASTM D-638180
tensile strength,vertical/horizontal
ASTM D-882380/350
Vicat softening point
ASTM D-1525103°C
melting point
ASTM D-2117126°C
ASTM D-100912%
45 glossness
ASTM D-245775%