Ultra-high molecular weight polyethylene slider UPE slider is anti-adhesive, does not ash, reducing fouling; even if it is slightly fouled, it is easier to be cleaned. The pipe is resistant to wear and corrosion, can greatly extend the service life, and does not need to apply anti-corrosion coating, which can save maintenance costs. In China, UHMW-PE sheet coils were used to make inner liners. The results showed that they were basically non-fouling, and their wear resistance was 8 times higher than that of ordinary steel tubes. Widely used in mining, metallurgy, coal preparation plant, thermal power plant, water treatment, chemical, pharmaceutical industry, shipbuilding, seawater utilization, petroleum industry and other fields.
The UHMWPE slider is based on a polymer copolymerized with different monomers, and uses a synthetic rare earth metal compound and various modifying additives to add a lubricating functional group to the molecular chain of the material through a chemical bond, and is naturally formed by a chemical reaction. Homogeneous polymer, this molding does not cause damage to the molecular chain of the polymer, ensuring the stability of the material itself. The reason why the slider works well is because the material itself is naturally formed by chemical reaction, the material will produce some tiny micropores, which are a good lubricating medium storage hole, which is beneficial to the formation of lubricating oil film. Therefore, the microporous structure of the product material is an appearance characteristic of the self-lubricating material itself, which is beneficial to the use of the product.
The UHMWPE slider requires the material to have good wear resistance, self-lubricating maintenance-free, low friction coefficient, large bearing capacity, and ordinary wear-resistant materials are difficult to meet such working conditions. The slider is made by adding a special alloy composition based on the polymer material through a special process. It has excellent friction coefficient, self-lubrication, maintenance-free, corrosion-resistant, wear-resistant, bearing capacity, anti-aging and other characteristics. The friction coefficient of the dual working surface of the product in the tri-state (dry state, water state, oil state) The change is small, and the dynamic and static friction coefficients of each state are small. The mechanical properties of the material under three fields (force field, electric field, chemical field) are stable. It has the characteristics of water lubrication, self-lubrication, small friction coefficient, maintenance-free, wear-resistant, corrosion-resistant, capable of withstanding heavy loads, impact resistance and good machining performance.
Ultra-high molecular weight polyethylene can replace carbon steel, stainless steel, bronze and other materials used in textile, paper, food machinery, transportation, medical, coal, chemical and other sectors. Such as the textile industry, such as shuttles, shuttle rods, gears, couplings, sweeping rods, buffer blocks, eccentric blocks, rod bushings, swinging consequences and other impact-resistant wear parts. In the paper industry, the cover plate, the wiper plate, the compacting parts, the joints, the sealing shaft of the transmission machinery, the deflecting guide wheel, the scraper, the filter, etc.; the hopper, silo, chute for the powder material in the transportation industry The lining ultra-high molecular weight polyethylene rod can be used for various mechanical parts, including food machinery gears, worm gears, worms, and bearings. Pumps, valves, baffles, filter plates in the chemical industry. Medically, it can also be used for heart valves, short surgical parts, artificial joints and birth control implants. Sports skating floors, rolling earth roads, snowboards, and motorized sled parts.
The service life is longer than that of steel, and the wear resistance is 3-7 times better than carbon steel and stainless steel.
1, Extreme high wear resistance
The unique molecular structure of UHMW-PE products gives it a detached resistance to sliding friction. The wear resistance is higher than that of ordinary metal and plastic products, which is 6.6 times of carbon steel, 5.5 times of stainless steel, 27.3 times of brass, 17.9 times of phenolic resin, 5 times of nylon and 5 times of polytetrafluoroethylene.
2, Excellent impact resistance
In the existing engineering plastics, the impact toughness value of this product is high. Many materials will crack, break, break or surface fatigue in severe or repeated impact. This product is tested according to GB1843 standard for cantilever beam impact test without damage.
3, Good chemical resistance
This product can withstand the corrosion of strong chemicals, except for a slight corrosion of some strong acid at high temperature, in other lye, acid solution, it can be used in concentrated <80 °C concentration; at concentration <75 Among the %, the performance of nitric acid with a concentration of <20% is stable, and the performance of sea water and liquid detergent is also stable.
4, Very low friction coefficient
Due to the waxy nature of this product, the friction coefficient (196N, 2 hours) is only 0.219MN/m. Its own lubricity is very good, its sliding performance is better than oil-lubricated steel and brass; especially in harsh environment. In places with a lot of dust and sand, the dry lubrication performance of this product is more fully displayed, not only can it move freely, but also protects related work from being worn or strained.
5, Surface non-adhesive
This product has good surface non-adhesion due to its low friction coefficient and non-polarity. Existing materials generally scale in media with a pH of 9 or higher, and the product does not scale. This feature is of great significance for the use of thermal power stations for coal discharge ash systems.
UHMWPE combines the superior properties of all plastics. Its five characteristics of impact resistance, wear resistance, chemical resistance, self-lubrication and impact energy are the high values of the existing plastics. Performance has received widespread attention in European and American countries.
1, UHMWP Gear, Worm Gear
Ultra-high molecular weight polyethylene as a gear, the worm wheel has the advantages of light weight, fatigue resistance, shock absorption and good self-lubricating performance. For parts that are afraid of lubricant contamination or can not add lubricant frequently, and do not hurt the corresponding gears or connectors, the noise is small, and the effect is remarkable in various industrial applications such as textile, paper making, printing, food machinery, etc. The noise is only steel. 1/4 to 1/2 of the piece.
2, UHMWP Slider
In the heavy industry, metal high-strength polyethylene materials are used as sliders in metal rolling presses, forging machines and other industrial machinery. The following advantages, long service life, replacement time and maintenance cost can be saved a lot. Maintain lubrication performance, resistance to impact fatigue, shock resistance, low noise, light weight, easy assembly and good wear resistance.
3, UHMWP Piston Ring, Support Ring
Features of piston ring with ultra-high molecular weight polyethylene: light weight: about 15% of bronze weight, reducing motion loss, saving mechanical power, good sliding performance, small difference between static and dynamic friction coefficient, so it is not sticky like metal Phenomenon, good physical properties, can avoid cylinder liner, oil-free self-lubrication, good sealing, easy to leak oil, long life and improve work efficiency.
4, UHMWP Bushings, Bearings
The use of ultra high molecular weight polyethylene as a shaft fitting has the following advantages: wear resistance, self-lubricating performance, and high PV value in general thermoplastics. Low friction coefficient, impact resistance, easy to hold shaft, sintering, no damage to the journal, long lubrication cycle, reduced maintenance, adaptability in harsh environments, long life.
5, UHMWP Roller
Due to its resistance to chemicals, abrasion and self-lubrication, UHMWPE is used as a roller or as a metal roll outer liner for conveying guide rolls, reverse rolls, and travel rolls. Long service life, easy processing, less oiling, no oil leakage, no rust, oil stains and rust stains will not contaminate the fiber.
6, other aspects
In addition to the above introduction, ultra-high molecular weight polyethylene is widely used in many aspects, such as: mixer wheel, valve body, valve core gasket, insulating sleeve, guide plate, pulley, etc., in the railway, there are moving shaft box liner, moving wheel spring The sling sleeve, the retaining ring, the crosshead sliding shoe, the rocker small end small square tile, etc., in the shipbuilding industry, there are bearings, water pump bearings, pulley sliders, sprocket, handle anti-electricity, sealing parts and the like.
Water Absorption Rate
Ball Indentation Hardness
Heat Distortion Temperature