Wholesale POM material Plastic Conveyor Chain
POM (Full-name: Polyformaldehyde), is a engineering plastics of non-side-chain, high density, high crystalline and linear polymer, which is praised "Plastic Steel", and has comprehensive excellent performances, such as: wear-resistance, high hardness, anti-impregnant, good rigidity (Tensile modulus of elasticity), chemical stability, isolation resistance and dimensional stability.
POM has widely applied in Automobile industries, electronic and electric products, commodity, pipeline & fittings, exact apparatus and so on, which can be instead of the bronze, Zinc, tin and other metals.
Except POM-H, is often copolymerized with ethylene oxide together, in order to avoid the melting of POM material in the high temperature. POM-H has the better performances than POM-C in its high crystalline, mechanical strength and rigidity.
And POM-C has the better performances than POM-H in its low melting point, temperature stability, fluxion characteristic and machining capability.
Father more, POM-H+PTFE, which is made from the Delrin POM Resin that maxed Teflon fiber symmetrically, has the low co-efficient of frication, good lubrication, wear-resistance, non-creepage resistance.
Material parameter table:
|2|| Water absorption(23oC in air)||%||0.20||0.20||0.17|
|4||Tensile strain at break||%||35||35||10|
|5||Compressive stress(at 2%nominal strain)||MPa||35||40||37|
|6||Charpy impact strength (unnotched)||KJ/m2||≥150||≥200||≥30|
|7|| Charpy impact strength (notched)||KJ/m2||7||10||3|
|8||Tensile modulus of elasticity||MPa||3100||3600||3200|
|9||Ball indentation hardness||N/mm2||140||160||140|
| ||10||Rockwell hardness||-||M84||M88||M84|
CNC machining center,CNC lathes,Milling,Injection Molding Machine,Extruder,Moulding press
Packing in plastics bags,wooden case,pallet,container,ect.